Hama N300 Mode D'emploi page 3

G Operating instruction
Controls and Displays
1. On/off switch
2. Network port
3. WPS button
4. Status LED
mportant note – Operating instructions
I
• This is a quick guide to provide you with the most
important basic information, such as safety warnings
and how to get started using the product.
• For the sake of protecting the environment and saving
resources, Hama dispenses with printed operating
instructions and provides them only in the form of PDF
files / eManuals on www.hama.com.
• Use the search function with the item number of your
product to easily find the product documentation.
• Alternatively, scan the QR code below to be taken
directly to the location of the operating instructions.
• Save the operating instructions to your computer's
hard drive for future reference, or print it out if
necessary.
Thank you for choosing a Hama product.
Take your time and read the following instructions and
information completely. Keep these operating instructions
in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or
to draw your attention to specific hazards and risks.
Note
This symbol is used to indicate additional information
or important notes.
2
2. Package Contents
Before you start setting up your Hama WLAN repeater,
make sure that you have all the components:
• 1x Hama N300 WLAN-Repeater
• 1x Quickstart
Hama GmbH & Co KG reserves the right to modify the
scope of delivery without prior notice.
3. Safety Notes
• This product is intended for private, non-commercial
use only.
• Only use the product for the intended purpose.
• Protect the product from dirt, moisture and
overheating, and only use it in a dry environment.
• Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
• Lay all cables so that they do not pose a tripping
hazard.
• Do not drop the product and do not expose it to any
major shocks.
• The product may only be operated with the type of
power supply network described on the name plate.
• Only connect the product to a socket that has been
approved for the device. The electrical socket must
always be easily accessible.
• Dispose of packaging material immediately according
to locally applicable regulations.
• Do not modify the product in any way. Doing so voids
the warranty.
Warning
Do not open the product. Do not continue to operate
the product if it is damaged, which may be indicated
by smoke, odours or loud noises. Contact your dealer
or our service department immediately (see Service
and Support).