Technics SA-C600 Manuel D'utilisation page 8

Control reference guide
This unit (front)
01 Standby/on switch (
• Press to switch the unit from on to standby
mode or vice versa. In standby mode, the
unit is still consuming a small amount of
power.
02 Top cover
• The top cover can slide to the both sides.
• The magnet is built-in to keep the top cover
closing.
• Do not apply too much force to the top
cover when sliding it. Doing so may cause
malfunction.
• Do not leave the top cover open for a
prolonged period. Doing so will cause the
lens to become dirty.
( 16)
03 Adjust volume
• 0 (min) to 100 (max)
04 Headphones jack
• When a plug is connected, the speaker
output terminals and subwoofer output
terminal do not output sound.
• Excessive sound pressure from earphones
and headphones can cause hearing loss.
• Listening at full volume for long periods
may damage the user's ears.
05 USB-A terminal (For AV) (5 V
• You can connect a USB device to the unit
and play back music stored on the USB
device.
08
(08)
)
500 mA)
06 Power indicator
• Blue: The unit is on.
• Red: The unit is in standby mode with the
network standby function.
• Off: The unit is in standby mode with no
function available.
07 Remote control signal sensor
• Reception distance:
Within approx. 7 m (23 ft) directly in front
• Reception angle:
Approx. 30° left and right
08 Touch switches
• [SELECT]:
Switch the input source
• [ ], [ ], [ ], [
Playback operation buttons
(e.g. "CD")
Stop [
[
Pause
• Press again to resume.
Skip [
Press and hold [
Search
[
• Each time you press the switch, a beep
sound will be heard.
09 Display
• Input source, clock, playback status, etc.
are displayed.
]:
]
]
] [ ]
] or
].