Radio Controlled Clock Dcf - Bresser TemeoTrend LB Mode D'emploi

Note: When the temperature falls below freezing point, the batteries
of the outdoor unit will freeze, lowering their voltage supply and the
effective range.
3. The transmission is within range and path is clear of obstacles and
interference. Shorten the distance when necessary.
4e) TRANSMISSION COLLISION
Signals from other household devices, such as door bells, home secu-
rity systems and entry controls, may interfere with those of this product
and cause temporarily reception failure.
This is normal and does not affect the general performance of the
product. The transmission and reception of temperature readings will
resume once the interference recedes.

5. RADIO CONTROLLED CLOCK DCF-77

5a) HOW TO SET THE RADIO CONTROLLED CLOCK
• After the batteries are installed. The clock will automatically search
the radio signal. It takes about 3-5 minutes to fi nish this process.
• If the radio signal is received, the date & time will be set automatically
with radio control signal icon [ ] turned on.
• If the clock fails to receive the time signal, it will be with the [ ] icon
turned off. Then user can set the time manually.
• Radio-controlled signal will be scheduled to receive every hour.
Receiving
5b) HOW TO SET THE CLOCK MANUALLY
To set the clock manually, hold [MODE] for two seconds it will show
the year. Use [▼] or [▲] to change it.
Press [MODE] to confi rm. Repeat the same procedure to set the
Strong No signal
31
Signal
reception
No symbol
disabled
GB/IE