Télécharger Imprimer la page

Geberit ZB 203A Mode D'emploi page 22

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 32
EN
• Regularly inspect pressing attachments for
defects and damage before and after every use.
Inspect the pressing attachments particularly for
incipient cracks in the pressing contour and on
the flanges.
• If there are incipient cracks: take the pressing
attachments out of service immediately, label
them as defective and do not use them again.
Avoiding damage to Geberit adapter jaw
ZB 203A caused by faulty pressing
operations
The Geberit adapter jaw ZB 203A can be
damaged by faulty pressing operations or use.
• All four claws of the Geberit adapter jaw
ZB 203A must fully grasp the pins of the Geberit
pressing collar.
• If you suspect that the Geberit adapter jaw
ZB 203A is damaged, it must be replaced.
Using personal protective equipment
People can be injured without suitable protective
equipment. Wear a protective helmet, protective
goggles and safety shoes during the pressing
procedure.
22
18014403178749451 © 12-2023
968.739.00.0(01)

Publicité

loading

Produits Connexes pour Geberit ZB 203A