Krups Arabica EA8110 Mode D'emploi page 15

CAUTION: Please read the safety instructions before using your appliance
Cleaning Fill tank
accessories
:
Light on
Sound signals:
One beep when pressing ON/OFF: turning on the power on the activated appliance.
One beep every ten seconds: the appliance is awaiting instructions from the user.
One double beep: the appliance has registered your request and will stop as soon as possible.
14
Lights
Clean Calc On / Off
The appliance is ready to be used.
Slow flashing: a task is in progress
Double flash: a 2 coffee cycle is in process.
Empty the coffee grounds collector (a 2 coffee cycle is
underway).
Empty the coffee grounds collector+ empty the drip
tray.
Check coffee grounds collector is not missing or
incorrectly positioned.
Fill tank with water. Check water tank is not missing or
incorrectly positioned.
Coffee cycle has stopped due to lack of water.
Fill tank with water.
Double coffee cycle has stopped due to lack of water.
Fill tank with water.
Cleaning program requested.
Cleaning program: cycle in progress.
Cleaning program: empty the coffee grounds collector.
Descaling program requested.
Descaling program: cycle in progress.
Descaling program, rinsing cycles: in progress.
Request
to empty and to fill water tank.
Empty the coffee grounds collector before the long
rinse cycle.
Long rinse request.
Long rinse in progress.
Constant flashing: operating fault.
Alternate flashing: Switching off of the appliance under
progress.
: Light flashing
: Light double flashing
Meaning