Changing To Sources Via External Input Equipment - Canon RE-455X Mode D'emploi

Changing to Sources via External Input Equipment

If you connect a computer or other equipment to the RGB input terminal, you can project images from that
equipment simply by pressing a button.
To switch to images from external input equipment such as a
computer, press the RGB IN button. The RGB IN indicator lights up,
and images from the equipment connected to the RGB input
terminal will be projected.
To return to images from the RE-455X camera head, press the
CAMERA button.
Projector
RGB OUT
RGB IN
External
input
Computer
• Depending on the computer or projector, images may appear
distorted and switching of image sources cannot be done
properly.
• Images may appear in a slightly different position between the
CAUTION
RE-455X camera head and a computer.
Regardless of the selected input equipment, images from the camera head will
be output to the video output terminal and S-video output terminal.
Camera of the RE-455X
INPUT SELECT button
Operation panel
POWER
LIGHT
INPUT SELECT
WHITE BALANCE
CAMERA
RGB IN
AUTO MANUAL
RED BLUE
E
EXPOSURE
WHITE
PAPER
LOW HIGH
16