Video Features; Display Devices - Intel Clevo P370SM Guide Utilisateur Concis

Video Features

You can switch display devices, and configure display op-
tions, from the Display control panel in Windows as long
as the video driver is installed.
To access the Display control panel in Windows:
1. Go to the Control Panel.
2. Click Display (icon) - in the Appearances and
Personalization category.
3. Click Adjust Screen Resolution/Adjust resolution.
OR
4. Right-click the desktop (use the Windows Logo Key
key combination to access the desktop) and select Screen
resolution.
5. Use the dropbox to select the screen resolution.
6. Click Advanced settings.
To access the NVIDIA Control Panel:
1. Go to the Control Panel.
2. Click NVIDIA Control Panel (icon) - in the Appearances and
Personalization category.
OR
3. Right-click the desktop (use the Windows Logo Key
key combination to access the desktop) and select NVIDIA
Control Panel from the menu.
To access the Catalyst™ Control Center:
1. Click the icon (Catalyst Control Center) on the Start screen.
OR
Double-click the icon in the notification area of the Desktop
taskbar (use the Windows Logo Key
access the desktop).

Display Devices

Besides the built-in LCD, you can also use an external
VGA monitor (CRT)/external Flat Panel Display or TV
(connected to the HDMI-Out port/Thunderbolt port) as
your display device.
Multi GPU Configuration
This computer features NVIDIA Scalable Link Inter-
+ D face (SLI) that improves graphic quality and performance
by combining dual GPUs (two video cards are required)
in a single system.
To enable/disable SLI Configuration:
1. Go to the NVIDIA Control Panel.
2. Click "+" next to 3D Settings if its sub-items are not shown and
then click Set SLI and PhysX configuration.
3. Click "Maximize 3D Performance" under "SLI configuration:".
4. Click to select "PhysX settings; Auto-select (recommended) is
the default setting.
5. Click Apply and Restart Now to restart the computer.
+ D
+ D key combination to
21