Subwoofer - YORKVILLE Legacy Série Manuel De L'utilisateur

Multiple nx200s's
As well as accommodating the full-range speakers, the parallel input jacks allow many nx200s's
to be connected in a string. There is no practical limit to the number of nx200s's that may be
connected together.
Full Range
Cabinet
nx200s

SUBWOOFER

Full Range
Cabinet
nx200s
SUBWOOFER
User Note
For normal operation connect the nx200s just like any ordinary speaker along with the full-range
speakers. The input level switch should be set to speaker. If the audio source does not have a
U ground (a ground pin on the AC cord), the ground lift switch must be set to gnd. The nx200s
may be wired before or after the full-range speakers. The nx200s does not alter the signal to the
full-range speakers. The nx200s will not draw any power from the amplifier driving the full-range
speakers. Please note that an external crossover is not necessary.
Power Amplifier
Amp In Amp Out
Mixer
Line Out
Line Out
Amp In Amp Out
Amplifier
2
Full Range
Cabinet
nx200s
SUBWOOFER
Figure 2
Full Range
Cabinet
Line Out
nx200s
SUBWOOFER
Figure 3