Publicité
Les langues disponibles
Les langues disponibles
Match Light
1. If the burner will not light after several attempts
then the burner can be match lit, before using the
match allow 5 minutes for any accumulated gas to
dissipate.
2. Clip a match on one end of the lighting rod.
3. Light match.
4. Hold lighting rod and insert lighted match right
next to the burner ports.
5. Push and turn the designated control knob to
HIGH.
6. Burner should ignite immediately.
Note: Remove all packaging, including straps, before using the grill
1.
Push
2.
Turn knob to
3.
Adjust flame
Main Burners
HIGH
10
Main burner
Component Identification
OFF
HIGH
Push In
③
LOW
Control Knob
Side burner
Side Burner
Publicité
