Publicité
Les langues disponibles
Les langues disponibles
English
Clone Function
Note:
Make sure that the SSD to which you want to transfer the data has the same or
higher capacity than the SSD from which you want to copy.
All data which are on the target SSD will be overwritten during the copy
procedure! Therefore we recommend to save the old data before or to use an
empty SSD.
Clone Function without PC
1.
Insert the SSD from which you want to copy the data into slot Source
(Source).
2.
Insert the SSD on which you want to save the data into slot Target.
3.
Connect the power supply to the "DC IN" jack of the Docking Station and
connect the power supply to the socket-outlet.
4.
The LED on the appropriate slots lights up.
5.
Press the clone button for about 3 - 5 sec. in order to activate the clone
process.
6.
The LED indicator shows the copy status.
Support Delock
If you have further questions, please contact our customer support
support@delock.de
You can find current product information on our homepage: www.delock.com
Final clause
Information and data contained in this manual are subject to change without
notice in advance. Errors and misprints excepted.
Copyright
No part of this user manual may be reproduced, or transmitted for any purpose,
regardless in which way or by any means, electronically or mechanically, without
explicit written approval of Delock.
Edition: 03/2024
-4-
Publicité
