Voicebox (Network Answering Machine); Extending The Aeris 126/126T - Swissvoice Aeris 126 Mode D'emploi

Aeris 126/126T

Voicebox (network answering machine)

You can forward the incoming calls to your operator's network answering machine
(Voicebox).
This function must be available and enabled by your network operator. New Voice-
box messages are signalled on your handset display by
operator).
• Press and hold key
access code (see chapter "Handset settings").

Extending the Aeris 126/126T

The delivered handset is already registered on to base station. In standby the inter-
nal number of the handset is displayed.
You can register up to 5 handsets to your base station.
If you register your Aeris 126/126T handset with a "third party" base station or a
"third party" handset on your Aeris 126/126T base station (GAP), you may not be
able to use some functions or only to a limited extent.
Register new handsets
Accessory handsets must be registered to the base station.
• Before registering a handset to the base, you must press and hold the base unit
key for about 5 seconds, a tone is heard on the base. Release the key.
• Press , select
• Select the desired base station. Press
you have entered (flashing display).
• Once the base station has been found, you are requested to enter the system
PIN (0000 on delivery). Press
• If the registration is successful you will hear a confirmation signal.
100
to call your mailbox. You must first enter the voicebox
REGISTER
and press
.
(dependent on network
.
. The handset seeks the base station