Publicité
Les langues disponibles
Les langues disponibles
Installation (continued)
6
Attaching the quick connector
to the hose
□
After inserting the hose through the hole in the
sink surface, reattach the quick connector (E)
by screwing it onto the threaded end of the
hose (1) in a clockwise motion. Hand tighten
only.
E
1
7
Attaching the quick connector
to the receiving block
□
Push the quick connector (E) rmly upward and
attach it to the receiving block (1). Pull down
moderately to ensure the connection has been
made.
□
After connecting the hose, install the weights (I)
at the lowest point of the hose.
I
6
1
E
Publicité
