Publicité
3. Edit satellite
Choose your preferable satellite by OK button. If you don't choose satellite, press OK button again.
If you want to do the next performance, press EXIT button.
4. Antenna Setting
While cursor key is on satellite, if you press OK button, you can select satellite. While cursor
key is on LNB Type, if you press OK button, it will select LNB frequency. While cursor key is on
motor setting, if you select "enable" and press OK button, it will show how to set up DisEqc 1.2
5. Automatic Search
You can choose quick & detail search by Left/Right key if you choose detail search, you can add
symbol rate.
14
After setting the parameters according to the
satellite, you can start search by pressing OK
button on the highlighted "Search Start".
After Searching is finished, press red button
to go to Channel Edit menu. If you press "Exit"
button after searching, it goes to
"Antenna Setting" menu
Publicité
