Publicité
Les langues disponibles
Les langues disponibles
Introduction
1.
Introduction
We would like to thank you for deciding to purchase this high-quality solder fume extraction
device and wish you much success in using it.
With this filter device, you can rely on a compact, powerful machine with an economic air
recirculation system. With its continuously adjustable extraction capacity, the device can be
adapted to all local conditions. Variable positioning and installation options allow use even
when space requirements are restricted. Additionally, a flexible plug-in system of extraction
arms and nozzles offers the opportunity to adapt the device to changing workplace conditions
at any time.
Filtering the solder fume occurs in two stages: First, large particles are captured by a pre-fil-
ter. A downstream combined filter consists of a HEPA filter component and an activated
carbon filter which take on the remaining particles and absorb harmful gases.
Thanks to its low noise level and rugged metal housing, Ersa EASY ARM 1 is suitable for use in
virtually any environment, from production through to development and laboratory areas.
1.1
Copyright, Liability
Ersa edited these operating instructions with utmost care. However, it is not possible to
assume any warranty regarding contents, completeness and quality of the indications in these
instructions. The contents is updated and adapted to the current conditions.
All the data contained in these operating instructions, as well as the information on products
and procedures have been ascertained using the latest technical tools to our best knowledge.
These indications are not binding and do not relieve the user from independently checking
the device before use.
We accept no liability for any infringement of third party rights for applications and proce-
dures without prior express, written confirmation. We reserve the right to make technical
changes in order to further improve the product.
To the extent permitted by law, liability for direct, consequential and indirect damage result-
ing from the purchase of this product is ruled out. All rights reserved.
These operating instructions must neither be reproduced nor modified, transferred or
translated into other languages – not even in extracts – without the written permission of
Ersa GmbH.
18
3BA00216 • 2023-02-17 • Rev. 3
Ersa EASY ARM 1
Publicité
