Samsung WF46BG65A Serie Mode D'emploi page 300

Troubleshooting
Problem
Extended time.
If a problem persists, contact a local Samsung service center.
Information codes
If the dryer fails to operate, you may see an information code on the display panel. To determine what you
should do, check the list of codes in the table below, and then try the suggested actions.
Information code
Door is open
FC
AC
HC
9C1
tC
60 English
Untitled-6 60
• Sensor Dry automatically senses the moisture in the load and shuts the
dryer off when the selected dryness level is reached.
The drying time can change according to the type and amount of
laundry. See the cycle chart for reference.
Meaning
Operating the dryer with the door
open.
Invalid power source frequency.
Electronic control problem (Invalid
Communication).
High temperature heating check.
The electronic control needs to be
checked.
The Thermistor1 resistance is very
low or high.
Action
Action
• Make sure the door is properly
closed.
• Make sure laundry is not
caught in the door
• Try restarting the cycle.
• If this information code
remains, contact a Samsung
service center.
Contact a Samsung service center.
• Clean the lint filter.
• If this information code
remains, contact a Samsung
service center.
• Check if power cord is
connected properly.
• Check if the electrical outlet is
working properly.
• If the information code
remains, contact a Samsung
service center.
• Check for a clogged lint screen.
• Check if the vent system is
restricted.
• If this information code
remains, contact a Samsung
service center.
2022-03-30 12:14:26