Télécharger Imprimer la page

Kuppersbusch EKI3920 1 Serie Instructions D'installation page 36

Publicité

Les langues disponibles

Les langues disponibles

WHAT TO DO IN CASE OF A PROBLEM
The hob or the cooking zone doesn't start-up:
 The hob is badly connected on the electrical network.
 The protection fuse cut-off.
 The looking function is activated.
 The sensitive keys are covered of grease or water.
 An object is put on a key.
The control panel displays [ U ]:
 There is no pan on the cooking zone.
 The pan is not compatible with induction.
 The bottom diameter of the pan is too small.
The control panel displays [ E ]:
 Disconnect and replug the hob.
 Call the After-sales Service.
One or all cooking zone cut-off:
 The safety system functioned.
 You forgot to cut-off the cooking zone for a long time.
 One or more sensitive keys are covered.
 The pan is empty and its bottom overheated.
 The hob also has an automatic reduction of power level and breaking Automatic overheating
Continuous ventilation after cutting off the hob:
 This is not a failure, the fan continuous to protect the electronic device.
 The fan cooling stops automatically.
The automatic cooking system doesn't start-up:
 The cooking zone is still hot [ H ].
 The highest power level is set [ 9 ].
The control panel displays [ U ]:
 Refer to the chapter "Keep warm".
The control panel displays [ II ]:
 Refer to the chapter "Pause".
ENVIRONMENT PRESERVATION
 The materials of packing are ecological and recyclable.
 The electronic appliances are composed of recyclable, and sometimes harmful materials
for the environment, but necessary to the good running and the safety of the appliance.
 Don't throw your appliance with the household refuses
 Get in touch with the waste collection centre of your
commune that is adapted to the recycling of the
household appliances.
36

Publicité

loading