Fujitsu AIRSTAGE AUA20L Serie Mode D'emploi page 7

G AU A20/25/30/36/45/54L
1. Remove the air filter.
1 Push the intake grille pushbuttons (two places).
2 Open the intake grille.
3 Hold down the hook at A and pull the filter out.
2. Cleaning
Cleaning the Air filter
Remove dust with a vacuum cleaner or by washing. After washing, be sure to allow it to dry thoroughly in a shady place
before reinstalling.
3. Re-attach the air filter to the intake grille.
1 When reinstalling the filter, be sure that the hooks at A and B engage correctly into place.
2 Close the intake grille.
B
Cleaning the body
Wash the body with warm water, and then dry with a clean and soft cloth.
When not using for an extended period
Leave the breaker on for at least 12 hours before starting operation when it is to be used again.
OPEN
PUSH
2
1
Filter
B
Intake grille
A
3
A
En-6