Publicité
Les langues disponibles
Les langues disponibles
EN
3
DRILL SAFETY WARNINGS
•
Hold the power tool by insulated gripping surfaces,
when performing an operation where the cutting
accessory may contact hidden wiring. Cutting
accessory or fasteners contacting a "live" wire may make
exposed metal parts of the power tool "live" and could
give the operator an electric shock.
•
Never operate at higher speed than the maximum
speed rating of the drill bit. At higher speeds, the bit is
likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
•
Wear ear protectors when impact drilling.Exposure to
noise can cause hearing loss.
•
Apply pressure only in direct line with the bit and do
not apply excessive pressure. Bits can bend causing
breakage or loss of control, resulting in personal injury.
•
Always start drilling at low speed and with the bit tip
in contact with the workpiece. At higher speeds, the bit
is likely to bend if allowed to rotate freely without
contacting the workpiece, resulting in personal injury.
•
Know your power tool. Read operator manual
carefully. Learn its applications and limitations, as well
as the specific potential hazards related to this power
tool. Obey this instruction will reduce shock, fire or
serious injury.
•
Always wear safety glasses with side shields marked to
comply with ANSI Z87.1. Obey this instruction will
reduce the risk of serious injury.
•
Protect your lungs. Wear a face or dust mask if the
operation is dusty. Obey this instruction will reduce the
risk of serious injury.
•
Protect your hearing. Wear hearing protection during
extended periods of operation. Obey this instruction
will reduce the risk of serious injury.
4
SYMBOLS ON THE PRODUCT
Some of the following symbols may be used on this tool.
Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the
tool better and safer.
Symbol
V
Explanation
Voltage
Direct current
Read all safety warnings and all in-
structions.
Safety alert
Wear eye protection
English
Symbol
5
RISK LEVELS
The following signal words and meanings are intended to
explain the levels of risk associated with this product.
SYM-
SIGNAL
BOL
DANGER
WARNING
CAUTION
CAUTION
6
Explanation
Wear ear protection
Low speed
High speed
Do not touch rotating part.
MEANING
Indicates an imminently haz-
ardous situation,which, if not
avoided, will result in death
or serious injury.
Indicates a potentially hazard-
ous situation,which, if not
avoided, could result in death
or serious injury.
Indicates a potentially hazard-
ous situation, which, if not
avoided, may result in minor
or moderate injury.
(Without Safety Alert Sym-
bol) Indicates a situation that
may result in property dam-
age.
Publicité
