Siemens S1 RKM 10014 Mode D'emploi page 34

Ways of releasing
air outdoors
Temporary installation
34
Water can also be removed as per
dehumidification using the pump installed on the
appliance. First, turn the appliance off and wait
for ten minutes in order to allow the cold flow to
stabilise. Then follow the instructions as set out
in "Dehumidification". It takes approximately one
minute to empty the condensed water tank using
the pump installed.
Connect the diffusion duct to the hot-air
expulsion duct.
Leave the window ajar and feed the
air–expulsion nozzle through the gap. On
windows with double frames, feed the expulsion
nozzle through the gap in the middle.
Close the window as much as possible and
secure it in place using the suction pad provided.