Coyote winny Manuel D'utilisation page 16

3. Functions and settings of nozzles
There are two nozzles on the cleaner, one of them opens once the other closes. Water flows out through
the open nozzle to thrust the cleaner to move forward. Adjust the nozzle by turning it to control the moving
route.
a. Settings of nozzle angle and moving route
The nozzles of the cleaner are marked with angles (0°- 40°).
The cleaner moves in an approximately straight line when the nozzle angle is 0°.
The cleaner moves in a more curved line at a larger angle from 0°- 40°.
b. Recommended three CYCLEs and nozzle settings
Setting 1: default settings 0° -- 20° / for most of pools
16