Hansgrohe Raindance S 240 1-Jet Rain 274741 Serie Instructions De Montage / Mode D'emploi / Garantie page 2

English
Technical Information
Max. flow rate
27493xx1, 27474xx1,
27476xx1, 26922xx1
04718xx0 only
26927xx1, 26923xx1 1.75 GPM (6.6 L/min)
Installation Considerations
• For best results, Hansgrohe recommends that
this unit be installed by a licensed, professional
plumber.
• 27493xx1, 27474xx1,
26922xx1, 04718xx0,
26923xx1 only: This unit is a rain shower
and must be installed with the spray face parallel
to the floor. Do not use showerarm 27412xx1.
• Please read over these instructions thoroughly
before beginning installation. Make sure that
you have all tools and supplies needed to
complete the installation.
• 27493xx1, 27474xx1,
26922xx1 only: The showerheads are for
use with an automatic compensating valve rated
at 1.9 GPM (7.2 L/min) or less.
• 04718xx0 only: This showerhead is for use
with automatic compensating valves rated at
1.7 GPM (6.4 L/min) or less.
2
2.5 GPM (9.5 L/min)
2.0 GPM (7.6 L/min)
27476xx1,
26927xx1,
27476xx1,
• 26927xx1, 26923xx1
showerhead is
compensating valves rated at 1.3 GPM
(4.9 L/min) or less.
• To prevent scald injury, the maximum output
temperature of the shower mixing valve (not
included) must be no higher than 120°F
(49°C). In Massachusetts, the maximum output
temperature can be no higher than 112°F
(44°C).
• Keep this booklet and the receipt (or other proof
of date and place of purchase) for this product
in a safe place. The receipt is required should it
be necessary to request warranty parts.
only:
for use with automatic
This