Maintenance And Cleaning; Service; Warranty - FLORABEST FAAS 10.8 A2 Instructions D'utilisation Et Consignes De Sécurité

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Start-up / Maintenance and Cleaning / Service / Warranty
2. Apply sideways pressure to the sabre saw,
bending it so the foot plate
wall sideways.
3. Switch on the tool and saw through the work
piece, applying consistent pressure.
A2) Plunge sawing (see Fig. F):
CAUTION! RISK OF KICK-BACK! Only
plunge saw soft work pieces (wood, etc.).
1. Place the bottom edge of the sabre saw shoe
onto the work piece.
Switch on the tool.
2. Tip the sabre saw forward and plunge the saw
blade into the work piece.
3. Straighten the sabre saw into a vertical posi-
tion and continue cutting along the cutting line.
B) Using the holding bracket (see Fig. G):
M ove the saw, applying slight downward pressure.

Maintenance and Cleaning

A lways disconnect the mains plug from the
socket and remove the battery pack
cleaning.
A lways remove the saw blade before working
on the power tool.
A lways keep the tool and the ventilation louvres
clean. Clogged ventilation louvres may result in
the tool overheating and/or being damaged.
C lean the tool after finishing work.
D o not allow liquids to enter the tool. Please
use a soft cloth for cleaning the housing. Never
use petrol, solvents or cleaning agents that at-
tack plastic.
C lean the saw blade holder, if necessary using
a brush or blowing out with compressed air.
When storing a lithium-ion battery for extended
periods, regularly check the charge. The optimal
charge is between 50 % and 80 %. The optimal
storage climate is cooling and dry.
32 GB
touches the
7
Note: Spare parts not listed (e.g. carbon brushes,
switches) can be ordered through our call centre.
7
The warranty for this appliance is for 3
years from the date of purchase. The ap-
pliance has been manufactured with care
and meticulously examined before deliv-
ery. Please retain your receipt as proof
of purchase. In the event of a warranty
claim, please make contact by telephone
with our Service Department. Only in this
way can a post-free despatch for your
goods be assured.
The warranty covers only claims for material and
maufacturing defects, but not for transport damage,
for wearing parts or for damage to fragile compo-
nents, e.g. buttons or batteries. This product is for pri-
before
3
vate use only and is not intended for commercial use.
The warranty is void in the case of abusive and im-
proper handling, use of force and internal tampering
not carried out by our authorized service branch. Your
statutory rights are not restricted in any way by this

warranty.

The warranty period will not be extended by repairs
made unter warranty. This applies also to replaced
and repaired parts. Any damage and defects extant
on purchase must be reported immediately after
unpacking the appliance, at the latest, two days after
the purchase date. Repairs made after the expiration
of the warranty period are subject to payment.

Service

Only have your tool
repaired by qualified professionals,
and only using original manufacturer
parts. This will maintain the safety of the tool.
Warranty
®

Publicité

Table des Matières
loading

Table des Matières