Publicité
Les langues disponibles
Les langues disponibles
To prevent accidental erasure
When
the
recorder
is operated
in the
record
mode,
previous
recordings
are automatically
erased.
For this reason,
cassettes
incorporate a safety device to prevent accidental erasure. When
the small tabs at the rear of a cassette are broken out, an inter-
lock on the recorder will be activated, preventing recording.
To protect a side A recording, break out the tab of that side.
For the protection of side B, break out the tab of side B.
When
the
cassette
is installed
with
the
tabs
broken
out, the
® button cannot be depressed.
side A
5 Sy \
£Y
1,
"<7
tab of side B
tab of side A
Cae
tape
XN
ay
Break out and remove the tab.
To reuse
a cassette
for recording
after the tabs
have
been
removed, simply cover each slot with a small piece of cellophane
or vinyl tape.
@ Do
not stick any material
on any part of the cassette except
the circled portions, as shown.
Erasing without recording
A cassette
can
be erased
without
adding
a new
recording
by
inserting the minipiug of the RK-128 connecting cord (supplied) in
the MIC jack and setting the recorder in record mode.
@ The phono plugs of the cord should be left free.
19
Publicité
