Publicité
Les langues disponibles
Les langues disponibles
EN
5. Using a socket wrench, remove the large pulley (23).
6. Remove the screws (18) that secure the left side plate
(26).
7. Remove the axle sleeve (27).
23
26
18
27
English
8. Pull the axle (24) and remove the old impeller, install the
new impeller.
9. Reinstall the nut (27) and right side cover (25).
10. Reinstall the left side plate (26), large pulley (23), belt
(22) and left side cover (25).
8.4
STORE THE MACHINE
•
Clean the machine before storage.
•
Make sure the motor is not hot when you store the
machine.
•
Make sure that the machine does not have loose or
damaged parts. If it is necessary, do these steps/
instructions:
•
Replace the damaged parts.
•
Tighten the bolts.
•
Speak to a person at an approved service center.
•
Store the machine in a dry area.
•
Make sure that children cannot come near the machine.
12
24
26
23
22
25
20
18
Publicité
