Saxxot CT1X Mode D'emploi page 5

3 F
UNCTIONING
Before utilizing, configure the CTx by
following the instructions in chapters 4
and 5.
The CTx display shows various information helpful
to the user of the service.
3.1 Wait mode
Fig. 4 and Fig. 5 show the Ctx's initial display. The
complete version with 8 services is shown in Fig. 4,
and in Fig. 5 the version with 1 service.
The numbers of the available services are shown at
the top of the display screen and can be 1, 2, 4, 6,
or 8, based on the CTx model, and indicate the
service status.
For example, in Fig. 3 the services 1, 3, 5, and 7
are free; service 2 has been selected by the user
and the price is displayed beneath it; service 4 is in
use; service 6 is also in use but in pause status;
service 8 is not available.
Fig. 3: Status of services
Below is a suggestion for how the user might
proceed, i.e., pressing the
select the desired service.
In the wait mode, if a prepaid card is read, its credit
will be displayed.
In the CTx models with 1 service it is suggested to
first insert the amount, after which the available
time with the pre-set base amount (Fig. 5).
The service will automatically start upon insertion of
the first coins or when a prepaid card is placed on
the reader area.
F E D
AVERO LECTRONIC ESIGN
button in order to
Pag. 5 / 51
Fig. 4: Wait mode
Fig. 5: Wait mode CT1X, CT1Xw
3.2 Select service
Only for versions with 2, 4, 6, 8 services.
Repeatedly press the
desired service, indicated by an arrow beneath the
corresponding flashing number (see Fig. 6).
Fig. 6: Select Service
The time of service associated with the established
base amount will appear beneath the arrow.
3.3 Insert amount and activate service
Only for versions with 2, 4, 6, 8 services.
Upon inserting a coin, the amount inserted will be
displayed () along with the corresponding time. The
total time available will be updated every time a
further coin is inserted.
00182-M01-02-ML - Manuale uso CTx
ENGLISH
button to select the