Duraflame DFI021ARU-02 Mode D'emploi page 5

OPERATION INSTRUCTIONS
FUNCTION
POWER
FLAME
HEATER
THERMOSTAT
EMBERBED
UNDULATION
EFFECT
A4022
ICON DESCRIPTION
The MAIN POWER switch supplies power to all of the
function of the fireplace. The switch must be in the ON
position for any functions or the remote to work.
Each time the FLAME button is pressed, the intensity of the
flame decreases. There are five brightness levels that can be
selected.
The HEAT button will turn ON/ OFF the heater.
The thermostat knob controls the thermostat setting.
Turning the knob clockwise will increase thermostat setting.
Rotating the knob counter-clockwise will decrease the
thermostat setting.
When the heater reaches the thermostat setting it will turn off
until the room cools at which point the heater will turn back
on.
This button on the remote control plays or pauses the
undulating emberbed effect.
5
www.tsicustomerservice.com