Publicité
Les langues disponibles
Les langues disponibles
CONTROL PANEL FEATURES
1. Output Ready Indicator LED (Green): Illuminates when
the generator is operating normally and indicates the
generator is producing electrical power at the receptacles.
2. Overload Indicator LED (Red): Illuminates when the
generator is overloaded which means the generator's
wattage / amperage capacity has been exceeded by
connected electrical devices or by a power surge. When
this occurs, the Output Ready Indicator LED will go off.
The engine will continue to run, but the red Overload
Indicator LED will stay on, and power will no longer be
supplied to connected electrical devices.
To rest the generator:
Remove all applied loads and stop the engine. Review for
any faulty or shorted connections. Start the generator and
reconnect electrical devices sequentially, allowing the
generator to stabilize after each device is connected. Make
sure the total wattage of connected electric devices are not
exceeding recommended rated output power.
1 2 3
Page 10
3. Oil Warning Indicator LED (Red): Illuminates when the
engine oil level falls below the safe operating level and the
generator will automatically shut off the engine. The engine
will not start until the proper amount of oil is in the crank-
case.
Publicité
