Publicité
5.
Align the camera's Mounting Plate Slots to the tabs in the
Mounting Bracket. Push in and slide down to secure in place.
6.
Insert the Fastener Screw through the Fastener on the top
of the camera and Mounting Bracket, then tighten with the
screwdriver.
7.
Tighten the pre-installed Locking Screw using the
screwdriver.
Note:
To remove the camera battery in the future, loosen the
locking screw.
8.
Turn the adjustment ring counter-clockwise to loosen and reposition the camera. Turn the
adjustment ring clockwise to secure the desired position.
9
U855AA_QSG_EN-FR-ES_R1.indd 11
U855AA_QSG_EN-FR-ES_R1.indd 11
Locking Screw
Back View
2023-06-05 9:37:23 AM
2023-06-05 9:37:23 AM
Publicité
