Waring Commercial WJX80X Mode D'emploi page 9

DISASSEMBLING YOUR WARING COMMERCIAL
®
JUICE EXTRACTOR
Step 1
Turn the Waring Commercial Juice Extractor switch to the OFF
®
position. Remove the plug from the power outlet.
Step 2
Remove the pulp container by tilting it slightly to remove from base.
Step 3
Unlock the locking arm by pulling it out, away from the top cover,
so that it rests on the side housing.
Step 4
Remove the lid by pulling it up and off the juice bowl and basket.
Step 5
Remove stainless steel filter basket using the metal handles. THE
STAINLESS STEEL FILTER BASKET CONTAINS SMALL, SHARP
BLADES TO CUT AND PROCESS FRUITS AND VEGETABLES. DO
NOT TOUCH BLADES WHEN HANDLING THE FILTER BASKET.
Step 6
Remove juice bowl by lifting it up and off the housing.
CLEANING & MAINTENANCE
For easy cleaning: Rinse removable parts with hot, soapy water
immediately after each use to remove wet pulp. Rinse with clean
water. Allow parts to air-dry or, place removable parts on top shelf
only of dishwasher. The cover, juice bowl, pulp container and filter
basket are dishwasher safe (top shelf only).
Wipe the motor base with a damp cloth. DO NOT IMMERSE
THE MOTOR BASE IN WATER OR ANY OTHER LIQUIDS.
THE CENTER OF THE FILTER BASKET CONTAINS SMALL,
SHARP BLADES TO PROCESS FRUIT AND VEGETABLES
DURING THE JUICING FUNCTION. DO NOT TOUCH BLADES
WHEN HANDLING THE FILTER BASKET, AS BLADES HAVE
SHARP EDGES.
9