Tefcold TFW300-2F Mode D'emploi page 14

Operation model TFW400
Connect the cabinet to a socket and turn on the switch on the control panel (POWER), see fig. 2.0.
When the cabinet is turned on, the display will show the current temperature in the cabinet.
Set new temperature:
Press this key and the set temperature will increase by 1°C for each pressure.
Press this key and the set temperature will decrease by 1ºC for each pressure.
Display temperature in ºC/ºF:
+
Press these keys simultaneously for 5 seconds and display of temperature will
change between Fahrenheit and Celsius.
Internal light:
Press this key to turn on/off the internal light.
In order to reduce energy consumption, this cabinet will automatically switch off the
internal light after 10 minutes.
If you want the internal light to remain on continuously, press and hold this key for 5
seconds until display show 'LP'.
To revert to normal mode, press and hold this key for 5 seconds until display show 'LF'
Fig. 2.0
14