Publicité
Les langues disponibles
Les langues disponibles
Simple steps to start
1. Press Power to turn the dryer on.
2. Turn the Cycle Selector to select a cycle.
3. Change the cycle settings (Dryness, Temp., and Time) as necessary.
4. Select desired options as necessary.
5. Press and hold Start/Pause (Hold to Start).
To change the cycle during operation
1. Press Start/Pause (Hold to Start) to stop operation.
2. Select a different cycle, and repeat steps 2-4 above if necessary.
3. Press and hold Start/Pause (Hold to Start) again to start the new cycle.
Cycle overview
Standard Cycles
Cycle
NORMAL
HEAVY DUTY
BEDDING
PERM PRESS
STEAM SANITIZE
REFRESH
DELICATES
ACTIVEWEAR
Untitled-19 43
For most fabrics including cottons and linens.
You can use the Eco Dry function in this cycle. For more information, see Eco
Dry in the "Control panel" section.
For drying items made out of heavy fabrics, such as jeans, corduroys, or work
clothes, with high temperature heat.
For bulky items such as blankets, sheets, and comforters.
For drying wrinkle-free cottons, synthetic fabrics, knits, and permanent
press fabrics automatically.
Use to sanitize items by applying steam and high-temperature heat to the
fabric. This cycle can make items soft and reduce smells. Confirm that the
laundry load is wet or partially wet before starting this cycle.
Use to smooth out wrinkles and reduce odors in loads of one to four items.
With this cycle selected, a small amount of water is sprayed into the dryer
drum after several minutes of tumbling with heat. Before removing the
laundry, confirm that the laundry load is dry.
For heat-sensitive items at a low drying temperature.
For exercise wear and outdoor wear such as sports jerseys, training pants,
water-repellent jackets, and other performance clothing. Thick fabrics like a
zipper or velcro closure of a jacket, or training socks may not be completely
dried.
Description
English 43
2022-09-05
2:49:48
Publicité
