HomeMatic IP HmIP-BBL-I Notice D'installation Et D'emploi page 31

5 Adapters for brand switch systems
To achieve compatibility with as many manufacturers as possible and
make integration in different designs easier, different rocker adapters are
available as accessories. A separate list on compatibility with standard
switch series can be found in the website download area www.homemat-
ic-ip.com.
Further information on installing the adapter can be found in the
operating instructions for the corresponding adapter.
6 Start-up
6.1 Installation instructions
Please read this entire section before starting to install the device.
Before installation, please note the device number (SGTIN) labelled
on the device as well as the exact installation location in order to
make later allocation easier. You can also find the device number on
the QR code sticker supplied.
Please note! Only to be installed by persons with the relevant elec-
tro-technical knowledge and experience!*
Incorrect installation can endanger
• your own life,
• and the lives of other users of the electrical system.
Incorrect installation also means that you are running the risk of serious
damage to property, e.g. from fire. You risk personal liability for personal
injury and property damage.
Adapters for brand switch systems
31