Publicité
Les langues disponibles
Les langues disponibles
Assembly
① Release the QR lever,raise the locking slide upwards, raise the
steering tube, then lower the locking slide downward.
② Tighten the finishing screw properly to lock the QR lever so that
the locking slide is firmly fixed in any direction, and check for
looseness during use.
06
① Loosen the QR lever, pull the locking slide inward and raise the
handlebar, then close the QR lever and tighten the set screw.
② Place the locking slide up to the safety line and lock it so that it is
firmly fixed with the QR lever. Always check for looseness during use.
Publicité
