Operation Mode; Fan Speed - Mitsubishi Electric PLA-RP BA Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 26
2. Parts Names
Display
The main display can be displayed in two different modes: "Full" and "Basic". The factory setting is "Full". To switch to the "Basic" mode, change the
setting on the Main display setting. (Refer to operation manual included with remote controller.)
<Full mode>
* All icons are displayed for explanation.
Room
Set temp.
Cool
Mode

Operation mode

Indoor unit operation mode appears here.
Preset temperature
Preset temperature appears here.
Clock (See the Installation Manual.)
Current time appears here.

Fan speed

Fan speed setting appears here.
Button function guide
Functions of the corresponding buttons appear here.
Appears when the ON/OFF operation is centrally controlled.
Appears when the operation mode is centrally controlled.
Appears when the preset temperature is centrally controlled.
Appears when the filter reset function is centrally controlled.
Indicates when filter needs maintenance.
Room temperature (See the Installation Manual.)
Current room temperature appears here.
Appears when the buttons are locked.
Most settings (except ON/OFF, mode, fan speed, temperature) can be made from the Menu screen.
(Refer to operation manual included with remote controller.)
4
Fri
Auto
Temp.
Fan
<Basic mode>
Cool
Set temp.
Mode
Appears when the On/Off timer, Night setback, or Auto-off timer func-
tion is enabled.
appears when the timer is disabled by the centralized control
system.
Appears when the Weekly timer is enabled.
Appears while the units are operated in the energy-save mode. (Will
not appear on some models of indoor units)
Appears while the outdoor units are operated in the silent mode.
Appears when the built-in thermistor on the remote controller is acti-
vated to monitor the room temperature ( ).
appears when the thermistor on the indoor unit is activated to
monitor the room temperature.
Indicates the vane setting.
Indicates the louver setting.
Indicates the ventilation setting.
Appears when the preset temperature range is restricted.
Fri
Auto
Temp.
Fan

Publicité

Table des Matières
loading

Table des Matières