Télécharger Imprimer la page

Publicité

Liens rapides

ASSEMBLY INSTRUCTIONS
INSTRUCTIONS DE MONTAGE
INSTRUCCIONES DE MONTAJE
TV STAND
MEUBLE TÉLÉVISION
SOPORTE TV
PRE-ASSEMBLY:
Carefully remove all parts and hardware from carton, along with any protective packaging.
Locate and set aside the hardware kit before discarding packaging.
Do not discard any contents until after assembly is complete to avoid accidentally discarding small
parts or hardware.
Assemble the furniture on a soft surface, and take extra care not to scratch or damage parts during
the assembly.
PRÉASSEMBLAGE :
Retirez soigneusement de la boîte toutes les pièces, toute la quincaillerie, et tout emballage de protecteur.
Localisez et mettez de côté le jeu de quincaillerie avant de jeter l'emballage.
Ne mettez aucun élément de contenu au rebut avant de terminer l'assemblage au complet, afin d'éviter
de jeter accidentellement de petites pièces ou un élément de quincaillerie.
Assemblez le meuble sur une surface douce et faites particulièrement attention à ne pas rayer ou
endommager les pièces lors du montage.
ANTES DEL ENSAMBLADO:
Retire con cuidado todas las piezas y herramientas de la caja, junto con todo el envoltorio protector.
Localice y separe el equipo de accesorios antes de desechar el embalaje.
No deseche nada hasta después de haber terminado de ensamblar para evitar botar por accidente piezas
pequeñas o herramientas.
Ensamble el mueble sobre una superficie blanda y tenga mucho cuidado de no rayar ni dañar las piezas
durante el montaje.
Save these instructions
Conservez ces instructions
Guarde estas instrucciones
Made in China
Fabriqué en Chine
Hecho en China
1
TV0403 TV0404 TV0946 TV0975 rev040521EFS FG2B

Publicité

loading

Sommaire des Matières pour Henn&Hart TV0403

  • Page 1 Ensamble el mueble sobre una superficie blanda y tenga mucho cuidado de no rayar ni dañar las piezas durante el montaje. Save these instructions Conservez ces instructions Guarde estas instrucciones Made in China Fabriqué en Chine Hecho en China TV0403 TV0404 TV0946 TV0975 rev040521EFS FG2B...
  • Page 2 PRECAUTIONS: Do not place items on the shelves which exceed the maximum weight limits of: Top shelf: 75 lbs. (34.0 kg) Lower shelves: 25 lbs. (11.3 kg) each Usage with televisions or loads heavier than the maximum weights specified may result in instability, causing tip-over and resulting in death or serious injury.
  • Page 3 PARTS / PIÈCES / PIEZAS...
  • Page 4 PARTS / PIÈCES / PIEZAS Part Description Quantity Part Description Quantity Pièce Description Quantité Pièce Description Quantité Pieza Descripción Cantidad Pieza Descripción Cantidad...
  • Page 5 PARTS / PIÈCES / PIEZAS Part Description Quantity Part Description Quantity Pièce Description Quantité Pièce Description Quantité Pieza Descripción Cantidad Pieza Descripción Cantidad TIPPING RESTRAINT HARDWARE VISSERIE DU ANTI-BASCULEMENT HARDWARE DE PROTECCIÓN ANTIVUELCOS (See pages 16-17 for installation) (Voir les pages 16-17 pour l’installation) (Consulte las páginas 16-17 para la instalación)
  • Page 6 HARDWARE / QUINCAILLERIE / FERRETERÍA Part Description Quantity Part Description Quantity Pièce Description Quantité Pièce Description Quantité Pieza Descripción Cantidad Pieza Descripción Cantidad...
  • Page 10 Back Arrière Posterior...
  • Page 11 Back Arrière Posterior...
  • Page 15 Finished Fini Terminado NOTE: Use the leveling feet to make sure furniture is level on the floor before using. REMARQUE: Utilisez les pieds de nivellement pour vous assurer que les meubles sont à niveau sur le sol avant de les utiliser. NOTA: Use los pies niveladores para asegurarse de que el mueble estén nivelados en el piso antes de usar la mesa.
  • Page 16 FURNITURE TIPPING RESTRAINT DISPOSITIF ANTI-BASCULEMENT TRABA DE PROTECCIÓN ANTIVUELCOS WARNING: This product is only a deterrent. It is not a substitute for proper adult supervision. Manufacturer assumes no liability for improper installation or excessive loads placed on screws, brackets, or straps. Young children may be injured by tipping furniture and the use of a tipping restraint is required.
  • Page 17 FURNITURE TIPPING RESTRAINT DISPOSITIF ANTI-BASCULEMENT TRABA DE PROTECCIÓN ANTIVUELCOS 1. Hold Bracket (K1) up to the wall and mark hole locations using a pencil. 2. Drill a pilot hole 1-1/4" deep. Use only Large Screws (K2) if going directly into wood studs. If going into drywall (no stud), use Wall Anchors (K3) with Large Screws (K2).

Ce manuel est également adapté pour:

Tv0404Tv0946Tv0975