Publicité
Les langues disponibles
Les langues disponibles
General safety instructions
Prior to use, please read the following instructions carefully and store them where they can
be found easily. If the product is to be given to another party, please pass on the
instructions to the future user.
The manufacturer shall not be liable for personal injury/material damage caused by improper
or incorrect use. In such cases, the warranty or guarantee will be invalidated as well.
General information
This product is designed for specific uses. We would like to state explicitly that this product
may not be modified and/or used in a manner not in keeping with its intended use.
Changes geared towards technical improvement may be made by the manufacturer without
prior notice and may not yet be included in the instruction booklet.
Safety instructions
To prevent malfunctions, damage and adverse health effects, please follow the
instructions below:
Prior to each use, check the condition of the product for any signs of wear.
•
Always ensure that the vehicle is adequately supported by axle stands or ramps
•
before working on it. Chock the wheels and ensure that the handbrake is securely
applied.
Always wear safety gloves as well as approved safety glasses when using the tool.
•
Do not use an impact wrench. This could damage the spindle.
•
Do not use excessive force. This could damage both the tool and other parts on
•
the vehicle too.
Slightly grease the thread of the spindle and the jack screws before each use.
•
This instruction booklet is in no way intended as a substitute for a workshop
•
manual. Always follow the instructions of the vehicle manufacturer.
6
Publicité
