Publicité
Control Panel
The control panel is located on the top right corner of the unit
Power ON/OFF
Press the power button to turn on the unit.
Press again to turn o ffthe unit.
NOTE : There is a thermostat limiter inside the unit.
When the inner temperature is too hot ,
the unit will automatically turned o ffto avoid damage to the product or risk of fire
Using the flame control
Press the flame button (5) to set the flames for different levels of flame height.
These flame levels are shown in the display
(1).The flame settings are as follows:
Regardless of the previous flame setting, when powered o ffby the main power button(6,.
the flames will come on in L3 mode (High) when you turn the heater on.·
When the heater function turns on,
the flame level will cycle through the 3 different level settings continuously.
3
Publicité
