Hensel AXM 20 Instructions De Montage page 13

A
Connecting thread length
Wall thickness of enclosure
Suited for cable diameter
IP degree of protection after
installation
Storage temperature in original
packaging
Chamfer on the enclosure
F
clearance
hole
- Connecting thread as per EN IEC 60423 with tolerance class 8g.
- Surface roughness in the area of the contact surface of the Ex
Equipment cable gland max. 6.3 μm Ra as per ISO 1302.
24
9 mm to 11 mm
≤ 3 mm - Clearance hole with
hexagonal locknut
Subject to nominal size,
8 mm to 21 mm
IP66 as per EN IEC 60529
-60 °C to +85 °C
Größe ØF
[mm]
M20x1.5 21 ±0.2
M25x1.5 26 ±0.2
M32x1.5 33 ±0.2
General
Information about this instruction manual
This instruction manual contains important details for safe installation,
commissioning and maintenance of Ex equipment cable glands.
Disregarding this instruction manual may cause severe damage,
injuries or even death.
Further documentation
Catalogue and datasheets
EU Declaration of Conformity
EU Type Examination Certificate
Work on Ex equipment cable glands may only be performed
by specialist electricians or personnel trained in electrical
engineering with the appropriate specialist knowledge and
skills for explosion hazardous areas.
Designation, description and classification of product
- General designation: Ex equipment cable gland
- Manufacturer designation: Ex cable gland, series AXM, consisting of
dome nut, sealing ring, gland body with connecting thread, o-ring-
sealing and hexagonal locknut
www.hensel-electric.de
www.hensel-electric.de
www.hensel-electric.de
25