Oregon Scientific BAR623P Mode D'emploi page 12

SET CLOCK / CALENDAR
You only need to do this if you have disabled the clock
feature (for example, if you are too far from or cannot
receive a signal).
1. Press and hold MODE for 2 seconds. The Clock Area
will blink.
2. Select the hour, minute, year, month, day, and day
of the week language. Press
setting.
3. Press MODE to confirm.
The language options are (E) English, (F) French, (D)
German, (I) Italian, and (S) Spanish.
SWITCH CLOCK DISPLAY
Press MODE to toggle between Clock with Seconds and
Clock with Weekday display.
P/N:086L003564-068 REV1
12/146
BAR623P_EN_R4.p65
All manuals and user guides at all-guides.com
or to change the
11
11
ALARM
This product is equipped with a 2-minute crescendo
alarm.
VIEW ALARM SETTINGS
Press . The alarm time and status will show in the
Clock Area.
SET ALARM
1. Press to switch to alarm display.
2. Press and hold again for 2 seconds. The alarm
settings will blink.
3. Select the hour and minute. Press
settings. Press to confirm.
ACTIVATE ALARM
Press to activate or deactivate the alarm.
in the Clock / Alarm Area when the alarm is activated.
8/7/04, 2:28 PM
or to change
shows