Télécharger Imprimer la page

Kohler Aquifer K-200 Instructions D'installation page 6

Masquer les pouces Voir aussi pour Aquifer K-200:

Publicité

Les langues disponibles

Les langues disponibles

Model Series: Kohler K-200 Aquifer™ Filtration System
K-200 system tested and certified by IAPMO
R&T Lab and IAPMO R&T against CSA B483.1;
NSF/ANSI Standard 42 for the aesthetic
reduction of chlorine and particulate class I;
NSF/ANSI Standard 53 for the reduction of
cysts, lead, atrazine, lindane, and turbidity.
See Performance Data Sheet for individual
contaminants and reduction performance.
Specifications
For conditions of use and replacement parts, refer to this guide and the
Performance Data Sheet.
Do not use on water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after this filter system.
Systems certified for cyst reduction may be used on disinfected waters
that may contain filterable cysts.
Operating Pressure: 40 psi (276 kPa) - 120 psi (827 kPa)
Operating Temperature: 33°F (0.5°C) - 100° (37.8°C)
Service parts and replacement cartridges are available from your
local distributor, or directly from Kohler Co.:
Kohler Co., 444 Highland Drive, Kohler, Wisconsin, 53044
EPA Est. No. 90013-FL-001
1285433-2-C
6
Kohler Co.

Publicité

loading