Binatone AEJ-1501 Manuel D'instructions page 6

All manuals and user guides at all-guides.com
DESCRIPTION OF
COMPONENTS
Fig. A:
1. Hinged lid
2. Removable filter
3. Operation indicator light
4. Switch «on/off»
5. Housing
6. Double-sided water level scale
7. Base
8. Power cord
BEFORE FIRST USE
Remove all packing materials from appliance;
make sure that there are no foreign items in it.
Wash internal surface of kettle with warm
soapy water, rinse carefully and wipe dry. In
case of unusual odor fill the kettle up to a maxi-
mum level with vinegar solution (1 element of 9
% vinegar per 20 elements of water), let the
kettle soak for an hour. Then wash out the kettle with tap water,
boil water in the kettle and pour it out.
OPERATING INSTRUCTIONS
1. Put the kettle with its base on a dry horizon-
tal surface.
2. Remove the kettle from the base (7), open
the lid (1), and fill the kettle with water.
3. Be sure that water level is between the maxi-
mum and minimum marks on the water level scale
(6). Do not switch on an empty kettle.
4. Close the lid (1) and put the kettle on the base (7).
5. Plug-in into a socket with a voltage identical to that indicated
on your kettle.
6. Use the "On/Off" button (4) to turn on the kettle. Set the
"On/Off" switch (7) in position «1» - the indicator (3) will
light, confirming that the device is heating water.
7. The device automatically switches off as soon as the water
starts boiling.
8. If you wish, you can switch off the kettle by hand before the
boiling process is over – press the button «On/Off» (4). When
pouring water out of the kettle, tilt the kettle slightly and gradu-
ally. Do not forget – hot water is inside the kettle!
9. If water has cooled and you want to re-boil or heat it again,
turn on the kettle on again.
6