Publicité
SETTINGS AND MODES
ADJUST V/W/TEMP.UP
ADJUST V/W/TEMP.DOWN
FOR PRECISE READING:
RESISTANCE/VOLTS/PUFF#
FLIP DISPLAY ORIENTATION
MODE SELECT (Ni/Ti/SS/W)
ADJUST RAMP UP WATTAGE IN TC MODE
WHEN IS IT TIME TO CHANGE THE CLEAROMIZER COIL?
All coils will need to be replaced after a certain amount of use. The
time between coil replacements will vary according to the eLiquid used
and personal vaping habits. You will know when the atomizer coil
should be replaced when you begin experiencing less performance
and taste from your clearomizer.
When a new clearomizer coil is used, large vapor clouds and robust
flavors will be produced from your e-liquid. The first sign that your coil
needs to be replaced is that there will be less vapor production.
The second indication that the atomizer coil needs to be replaced is
that flavors will become less tasty, and may begin to have a burnt
taste. This burnt taste will become more and more apparent as the coil
continues to wear out.
14
We recommend that you change the coil at the very first sign of a burnt
taste and decreased clouds.
Replacing the coil:
1) Unscrew the bottom cap of the Innokin Zenith.
2) Hold the coil and gently pull to remove.
Important:
3) Align the flat sides of the new coil.
4) Push to insert new coil firmly into Tank.
5) Carefully and firmly tighten the cap.
IMPORTANT CHARGING INFORMATION:
THE DEVICE IS RESTRICTED TO INDOOR CHARGING ONLY
Never charge a battery that has been damaged or dropped.
Never plug a charger into a non-approved mains power transformer.
Do not overcharge. Remove the battery from the charger when
charging is complete.
Never leave a charging battery unattended.
Only use the included high quality charging cable.
THE DEVICE IS INTENDED TO BE SUPPLIED BY A UL LISTED USB
WALL CHARGER
15
Publicité
