Rx Mode - Norstone Transmetteur/Récepteur HD Bluetooth Mode D'emploi

GETTING STARTED
c) Switch input mode
In the status of connected to a device, switch MFB button to the right side to changing over
from 3.5 audio mode and optical mode.
NOTE :
- Please keep NorStone HD Bluetooth Transmitter / Receiver input mode and media player mode
the same.
- Only connected to a Bluetooth device, you can switch input mode.

3. RX Mode

1. Selecting TX Mode
a) Please turn the TX/RX switch to RX mode before power on NorStone HD Bluetooth
Transmitter / Receiver.
b) In RX Mode, please refer to the picture as shown below. Please connect 3.5 audio line and
optical audio line to the corresponding audio-out jack.
NOTE : In power On mode, if you want to switch TX/RX to RX mode, you need to restart the
NorStone HD Bluetooth Transmitter / Receiver.
22
UK