Norstone Transmetteur/Récepteur HD Bluetooth Mode D'emploi page 20

GETTING STARTED
2. Pairing with Bluetooth receiver
• Pairing with one Bluetooth receiver
a) Ensure the NorStone HD Bluetooth Transmitter / Receiver is in TX mode, otherwise reset
it to TX mode.
b) Keep NorStone HD Bluetooth Transmitter / Receiver and receiver within 1 meter when
pairing, the closer the better.
c) Make both enter pairing mode.
d) NorStone HD Bluetooth Transmitter / Receiver will search for Bluetooth devices and
finishing pairing automatically. After successful connecting, Bluetooth indicator light will be
ON constantly.
• Pairing with two Bluetooth receivers
a) Pair NorStone HD Bluetooth Transmitter / Receiver with device one following the steps
above.
b) Turn on the NorStone HD Bluetooth Transmitter / Receiver and make it enter pairing mode
again, and pair it with the second device.
c) Restart device one to connect with NorStone HD Bluetooth Transmitter / Receiver. It
already has connected with both devices at this moment.
NOTE :
- The pairing mode will last 2 minutes. NorStone HD Bluetooth Transmitter / Receiver will enter
standby mode if no devices can be connected within 2 minutes
- Every time NorStone HD Bluetooth Transmitter / Receiver is turned On, it will automatically
connect to the last device. It can't connect to two devices simultaneously. If you want to pair with
two devices, please active the other device to connect.
- When NorStone HD Bluetooth Transmitter / Receiver is in standby mode and don't connect with
device, switch MFB button to the right side, it will connect to last connected devices automatically.
20
UK