Nicols IC4 LED Manuel D'utilisation page 22

DMX 512 Address Setting
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to change the DMX 512
address. Once the address has been selected, press ENTER button to setup or
automatically exit menu mode without any change after one minute. Back to the previous
functions without any change press MENU button.
Channel Mode
Press the MENU button up to when the
button and the display will blink. Use DOWN and UP button to select the
channels mode) or
(4 channels mode) or
been selected, press the ENTER button to setup or automatically exit menu mode without
any change after one minute. To go back to the functions without any change press the
MENU button.
Show Mode
Press the MENU button up to when the
button, Use DOWN and UP button to select the
(show 1) or
selected, press ENTER button to confirm, and use DOWN and UP button to adjust the
speed (speed 1) or...or
press the ENTER button to setup or automatically exit menu mode without any change
after one minute. To go back to the functions without any change press the MENU button.
Chase Mode
Press the MENU button up to when the
button, Use DOWN and UP button to select the
16) or (fade), once the chase or fade has been selected, press ENTER button to
confirm, and use DOWN and UP button to adjust the speed
(speed 8). Once the speed has been selected, press the ENTER button to setup or
automatically exit menu mode without any change after one minute. To go back to the
functions without any change press the MENU button.
(4 channels mode) or
(6 channels mode)or
(Show 2) or ... or
is shown on the display. Pressing ENTER
is shown on the display. Pressing ENTER
is shown on the display. Pressing ENTER
(show 12), once the show has been
(speed 8). Once the speed has been selected,
is shown on the display. Pressing ENTER
(chase 1) or...or
(4 channels mode) or
mode. Once the mode has
(Random show) or
(speed 1) or...or
(4
(chase