Télécharger Imprimer la page

Rockwell Automation Allen-Bradley 1492-AIFM6S-3 Mode D'emploi page 6

Publicité

Wiring
Important: Wiring diagrams are online at www.rockwellautomation.com/en/e-tools.
Câblage
Important: Les schémas et sont disponibles en ligne à l'adresse www.rockwellautomation.com/en/e-tools.
Verdrahtung
Wichtig: Die Schaltpläne finden und unter der Internet-Adresse www.rockwellautomation.com/en/e-tools.
Importante: Gli schemi di cablaggio sono illustrati, oppure online all'indirizzo www.rockwellautomation.com/en/e-tools.
Cablaggio
Importante: Los diagramas de conexiones están en y se encuentran en-línea en www.rockwellautomation.com/en/e-tools.
Cableado
Specifications
Spécifications
Technische Daten
Specifiche
Especificaciones
Catalog No.
Voltage
Référence
Tension
Bestell-Nr.
Spannung
N. Catalogo
Tensione
Referencia
Voltaje
1492-AIFM6S-3
1492-RAIFM6S-3
0 - 132 VAC/DC
1492-AIFM6TC-3
Catalog No.
Operating Temperature Range
Référence
Plage températures de fonctionnement
Bestell-Nr.
Betriebstemperaturbereich
N. Catalogo
Limiti temperatura di funzionamento
Referencia
Rango de temperatura de funcionamient
1492-AIFM6S-3
1492-RAIFM6S-3
0˚ C - 60˚ C
1492-AIFM6TC-3
➁ For transients > 600 Vp use a UL recognized suppression device rated at 2.5 kV withstand.
Pour des transitoires > 600 Vp utilisez un dispositif de suppression certifié UL à 2,5 kV nominal de tenue.
Für Einschaltstöße > 600 Vp verwenden Sie einen UL anerkannten Entstörer, der bewertet wurde bei 2,5 kV standzuhalten.
Per transitori > 600 Vp usare dispositivo di soppressione riconosciuto da UL capace di sopportare 2,5 kV.
Para transitorios > 600 Vp use un dispositivo de supresión reconocido UL clasificado con 2,5 kV.
➂ Non-condensing
Sans condensation
Nicht kondensierend
Senza condensa
sin condensación
➃ Power, input and output (I/O) wiring must be in accordance with Class I Division 2 wiring methods - Artticle 501-10(B)(1) of the National Electrical Code.
WARNING: Explosion Hazard - substitution of components may impair suitability for Class I Division 2.
WARNING: Explosion Hazard - Do Not Disconnect Equipment unless power has been switched off or the area is known to be Non-Hazardous.
SURGE SUPPRESSION follow the literature recommendations of the PLC module being used.
La section SUPPRESSION DES SURTENSIONS se trouve à la suite de la littérature qui contient les recommandations relatives au module PLC utilisé.
ÜBERSPANNUNGSSCHUTZ Bitte beachten Sie die Dokumentationsempfehlungen für das jeweils benutzte SPS-Modul.
Per la SOPPRESSIONE DEI PICCHI TEMPORANEI, seguire le istruzioni riportate nella documentazione in dotazione al Modulo PLC utilizzato.
SUPRESIÓN DE SOBRETENSIÓN, siga las recomendaciones indicadas en la documentación del módulo PLC respectivo.
Reference Publications: Refer to 1770-4.1
and appropriate PLC I/O module installation manual.
PN-15915 DIR 40063-321 (Version 12)
Printed in U.S.A.
All manuals and user guides at all-guides.com
Current/Circuit
Current/Module
Courant/Circuit
Courant/Module
Strom/Schaltkreis
Strom/Modul
Corrente/circuito
Corrente/modulo
Intensidad/circuito
Intensidad/módulo
2 Amps
12 Amps
Operating Humidity
Humidité relative
Betriebsluftfeuchtigkeit
Umidità di esercizio
Humedad operativa
5 - 95%
#Terminals/Shield Common
Nbre bornes/blindage commun
Anzahl der Terminals/
Abschirmungsmasse
#Terminali/comune dello schermo
#Terminales/Protector común
6
Dimensions
Approx. Shipping Weight
Dimensions
Poids d'embarquement approximatif
Abmessungen
Ungefähres Versandgewicht
Dimensioni
Peso approssimativo del carico
Dimensiones
Peso aproximado al momento de
embarque
3.15 in. (80 mm) W
.55 lb.
3.27 in. (83 mm) H
(249 g.)
2.74 in (69.6 mm) D
Maximum Recurring Peak Voltage ➁
Tension de crele réurrente maximale
Maximale periodische Hochstspannung
Tensione massima di cresta ricorrente
Voltaje de cresta iterativo máximo
600 V
p
Standards
Normes
Standards
Standard
Estándares
cULus (File: E10314, Guide No. NRAG)
Class 1 Div 2 Groups A, B, C and D
Hazardous Locations.
Temperature Code = T3C at 60˚C ➃
CE: Compliant for all applicable directives
FM Class 1 Div 2 Groups A, B, C and D
Temperature Rating T3C = 60˚C (J.I. 3000590,
all except relay modules)

Publicité

loading

Ce manuel est également adapté pour:

Allen-bradley 1492-raifm6s-3Allen-bradley 1492-aifm6tc-3