Télécharger Imprimer la page

Jabra BT2035 Mode D'emploi page 7

Publicité

All manuals and user guides at all-guides.com
CharGe your headset
make sure that your headset is fully charged for 2 hours before
you start using it . use the ac power supply to charge from a power
socket . When the light indicator (led) has a solid led light, your
headset is charging . When the solid led light turns off, it is fully
charged .
use only the charger provided in the box - do not user chargers
from any other devices as this may damage your headset .
Please note: The lifetime of the battery will be significantly reduced
if your device is left uncharged for a long period . We therefore
recommend that you recharge your device at least once a month .
turninG your headset on and off
- Press the answer/end button until you see a burst of flashes on
the indicator light (led) to turn on your headset .
- Press and hold the answer/end button until you see a burst of
flashes on the indicator light (led) to turn the headset off .
Please note that the led indicator light turns off after 1 minute to
save battery . headset is still active, and light will flash again after
tap on the answer/end button or any call activity . To check if the
headset is on, tap the answer/end button once – the led indicator
light will flash, if the headset is on .
Jabra bT2035
4

Publicité

loading