Gardebruk Z 01612 Mode D'emploi page 2

EN
Dear Customer,
We are delighted that you have chosen this laundry rack. If you
have any questions, please contact the customer service via our
www.service-shopping.de
website:
Safety instructions
■ This product is intended for hang drying laundry.
■ The product is designed for private use, not for commercial use.
Only use the product for the intended purpose and only as de-
scribed in the instructions. Any other use is deemed improper.
■ The product can be used both outdoors and indoors and car-
ries approximately 15 kg of laundry.
■ Defects arising due to improper handling, damage or attempts
to repair the device are excluded from the warranty. This also
applies to normal wear and tear.
■ Danger of suffocation ! Keep the packaging material away
from children and pets.
■ Always place the product on an even, solid base and make
sure that the laundry is distributed evenly on it to prevent injury
and damage to property, e.g. caused by the product tipping
over.
■ The product is NOT a toy! Make sure that children do not hang
on the product.
Product contents
• 1 upper bar with 3 plastic arms
• 1 middle bar
• 1 bottom bar with 3 supports
Device overview
1
7
2
3
4
6
5
Prior to fi rst use
1. Unpack all parts. Check the contents with the product contents
(see section "Product contents and overview") and ensure that
the contents are complete and also check for any transport
damages. Should you identify any transport damages, please
promptly consult the customer service.
2. Screw the upper bar and the middle bar together.
3. Put now the middle bar as far as possible into the bottom bar.
The notch on the middle bar has to be put over the detent inside
of the bottom bar.
The laundry rack is now ready for use!
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
*) Calls to German landlines are subject to charges. The cost varies depending on the service provider.
01612_DE-GB-FR-NL_V4.indb 2 01612_DE-GB-FR-NL_V4.indb 2
All manuals and user guides at all-guides.com
Product number Z 01612
1 Plastic arm
2 Upper bar
3 Middle bar
4 Bottom bar
5 Support
6 Slider with release button for
expanding and collapsing the
supports
7 Slider with release button for
pushing the plastic arms up and
down
Customer Service / Importer:
All rights reserved.
Use
Expanding
1.
2.
3.
Collapsing
1.
2.
3.
Disposal
The packaging material can be recycled. Dispose of the
packing in an environmentally-friendly manner and make
it available to the collection service for recyclable
materials.
Dispose of the product in an environmentally-friendly
manner. The product does not belong in the household
garbage. For more information, please contact the
administration in your community.
✆
+49 38851 314650 *)
Instructions
1. Push the release button
on the support slider and
push the slider down until
the supports have been
completely expanded. The
slider must audibly lock into
place.
2. Push the release button on
the arm slider and push the
slider up. The slider must
audibly lock into place.
If desired, the slider can be
left on the lower position.
3. Fold the 3 plastic arms down.
1. If necessary, push the
release button on the arm
slider and push the slider
down. The slider must
audibly lock into place.
2. Fold the 3 plastic arms up.
3. Push the release button on
the support slider and push
the slider up. The slider must
audibly lock into place.
Z 01612_V4_12_2015
08.12.2015 16:06:07 08.12.2015 16:06:07