Product Description; Assembly And Installation - Nuki Keypad 2 Pro Guide D'installation

EN

Product description

The Nuki Keypad 2 Pro offers the possibility
to operate other Nuki actuators, such as
the Nuki Smart Lock, by fingerprint or
by entering an access code. The device
is battery-powered and also suitable for
permanent power supply. It connects to the
actuator via Bluetooth.
Proper use
Compatible with Nuki Actuators.
Operating temperature: -20 – +70° C,
maximum humidity 95%, non-condensing.
Batteries: 4x AAA Alkaline (1,5V), Lithium
(1,5V) or NiMH (1,2V). Permanent power
supply voltage range: 5-24V AC/DC.
Any other use is deemed improper and
shall result in an exclusion of warranty and
liability.

Assembly and installation

Information on assembly can be found in
the enclosed installation instructions.
For flush mounting, a milled recess is
required.