Publicité
Les langues disponibles
Les langues disponibles
Operating Instructions
The Glue Gun uses hot glue (up to 200℃). Do not touch the glue and the nozzle while using the de-
vice to avoid burns. Wait until the glue and the nozzle are completely cooled down before you touch
!
them to avoid burns.
Make sure to always point the nozzle downwards. Do not hold the Glue Gun horizontally and do not
point it upwards when you are using it. Do not point the Glue Gun at yourself or other people.
!
Smoke can emit from the Glue Gun the first time you use it. This is normal and will stop after a few
moments. If a lot of smoke emits from the device, unplug the device immediately and place the Glue
!
Gun in a well-ventilated area.
Place the Glue Gun on the safety stand in between glueing different things. NEVER place the Glue
!
Gun on its side.
Using
1.
Make sure the surface is clean, dry and grease-free before you start glueing. Roughen up the surface in
case it is smooth.
2.
Unfold the safety stand. Put down the device.
3.
Place a glue stick in the opening at the back of the Glue Gun. Press the trigger a few times to make sure
the glue stick is firmly connected to the heat element.
4.
Plug the power cord into the socket and press the On / Off button to turn on the Glue Gun. The light of
the power indicator shows the Glue Gun is turned on.
5.
Let the Glue Gun preheat for 3-5 minutes.
6.
Place the nozzle on the surface you want to glue and slowly press the trigger. The molten glue will now
slowly flow from the Glue Gun. You can carefully try out how much pressure is needed.
7.
Insert a new glue stick when you notice there is very little glue coming from the gun. Do not worry about
leftover glue in the gun. It will simply cool down in the device and re-melt when you use the Glue Gun
again.
8.
Press the On / Off button once more to turn off the Glue Gun. Pull the power cord from the socket when
you have finished glueing and let the Glue Gun cool down.
12
Maintenance and Cleaning
-
Always pull the plug from the socket before you start cleaning the Glue Gun. Clean the Glue Gun with
a soft, clean and damp cloth. Do not use flammable solvents or aggressive cleaning products to avoid
damages or personal injuries.
Storage
-
Store the Glue Gun in a clean and dry place. Do not store the device in extreme high or extreme low
temperatures.
Disposal - Recycle
-
Contribute to a cleaner living environment! This product is subject to the European Directive (EU)
2012/19/EU. Do not dispose of the Glue Gun with the household waste. For proper recycling, please
contact your local authority or your household waste disposal service for further details on your nearest
designated collection point.
Service and Warranty
-
If you need service or information regarding your product, please contact the Auronic Customer Support
at service@auronic.nl
-
Auronic provides a 2-year warranty on its products. To obtain service during the warranty period, the
product needs to be returned with a proof of purchase. Product defects must be reported within 2 years
from the date of purchase. This warranty does not cover: damages caused by misuse or incorrect repair;
parts subject to wear; defects that the customer was aware of at the time of purchase; damages or
defects caused by customer neglect; damages or defects caused by third parties.
Disclaimer
-
Changes reserved; specifications are subject to change without stating grounds for doing so.
13
Publicité
